星间自主相对测距中载波相位整周模糊解算方法研究

载波相位整周模糊度解算是利用载波相位进行星间无线电相对距离测量的关键。介绍编队小卫星的工作特点,针对星间相对距离实时、高精度测量的要求,详细阐述利用双频伪码和载波相位观测值解算载波整周模糊度的方法,推导伪码、载波相位测量误差与模糊度解算误差的关系,讨论降低误差的方法。计算机仿真结果表明,该方法可以在单个测量历元获得载波相位整周模糊解算,解算精度与伪码测距精度成正比关系。     

星间红外探测与测量系统

文章主要介绍了具有凝视成像功能的红外探测系统的研究和设计。首先简要描述了红外测角系统的组成和工作原理；然后重点论述了红外探测系统的性能指标和光学设计；最后对红外探测系统设计研究作了总结和展望。     

导航卫星星座整体旋转的检测与校正

研究了利用星间距离观测值或速度观测值进行导航卫星自主定轨时存在的卫星星座整体旋转的问题，并提出了消除该系统误差的地面校正法。利用含有系统误差△Ω的卫星星历进行单点定位时，求得的点位大地经度也会产生△L的偏差，且△L=△Ω，因此，由点位大地经度差△L即可确定卫星星座整体旋转误差。试验结果表明，△Ω与AL的差值不到10^-5秒，从而证实该方法是有效的。     

GNSS Satellite Autonomous Integrity Monitoring (SAIM) using inter-satellite measurements

Integrity is the ability of Global Navigation Satellite Systems (GNSS) to detect faults in measurements and provide timely warnings to users and operators when the navigation system cannot meet the defined performance standards, which is of great importance for safety of life critical applications. Compared with both Receiver Autonomous Integrity Monitoring (RAIM) and ground based GNSS Integrity Channel (GIC) methods which are widely adopted nowadays, the Satellite Autonomous Integrity Monitoring (SAIM) method can be used to monitor orbit/ephemeris and clock errors, and has advantages in monitoring orbit and clock quality and providing instantaneous responses when faults happen.     

白天激光漫反射测距中微弱信号检测的单开门多触发方法

白天激光漫反射测距因存在强背景噪声,导致微弱回波信号的检测十分困难,严重限制了激光漫反射测距的广泛应用。因此,提出了采用单开门多触发方法解决白天激光漫反射测距的微弱信号检测难题。首先,介绍了一种GM-APD (Geiger-ModeAvalanchePhotoDiode,盖革模式雪崩光电二极管)多触发概率分布函数的快速求解方法。接着,取激光漫反射测距系统典型参数,理论分析了多触发情况下的回波信号检测概率,分析结果表明单开门多触发方法可提高激光漫反射测距在白天情况下的回波信号检测概率。同时,通过对触发次数限制的优选,可以增加有效检测比,减少白天观测条件下回波信号的提取代价。最终,通过系统仿真验证了理论分析结果的正确性。因此,单开门多触发方法是解决白天激光漫反射测距微弱信号检测的可行途径之一。     

用加权几何精度因子选星的GPS抗多径定位方法

在ＧＰＳ（Ｇｌｏｂａｌ ｐｏｓｉｔｉｏｎｉｎｇ ｓｙｓｔｅｍ）中普遍用几何精度因子（Ｇｅｏｍｅｔｒｉｃ ｄｉｌｕｔｉｏｎ ｏｆ ｐｒｅｃｉｓｉｏｎ，ＧＤＯＰ）来选星，但对近距差分ＧＰＳ，多径干扰已变成了主要误差源，传统的ＧＤＯＰ值选星不是最佳的。为减小多径误差，文中提出了一种新的加权ＧＤＯＰ值选星方法。在仿真验证过程中，分析了多径的几何传播机理，并考虑了抗多径天线的抑制效应。仿真结果表明，用加权Ｇ     

分布式航天器相对位置测量平台设计

分布式航天器间相对位置的实时高精度测量是分布式航天器实现空间队形保持的关键技术之一。为了对相对位置测量方法进行研究、分析和论证，建立了分布式航天器相对位置测量地面实验平台。介绍了分布式航天器相对位置测量和解算的基本原理；论述了仿真平台的组成和功能；基于仿真平台对相对位置测量精度进行了仿真试验，试验结果显示该平台具有良好的性能指标；最后介绍了相对位置解算仿真评估软件的设计方法。     

导航星座的自主导航技术--卫星自主时间同步

基于星载原子时钟频率稳定性的Allan方差表达,建立系统状态方程,并以星间双向测量伪距差作为基本观测量,组成系统测量方程,从而可以设计适用于导航星座卫星时间同步的Kalman滤波算法。系统仿真结果表明：通过对星间双向测量数据的滤波处理,能够实现星座卫星时间精密同步。     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.